BMW Engine Specs, Reliability and Problems

M52B20TU- is a gasoline power unit from Bavarian engineers, which is characterized by a working volume of 2 liters, which gives it the ability to provide a maximum power of 150 horsepower. The engine was installed on the BMW 3-series fourth-generation E46 in station wagon, sedan and coupe body styles. M52B20TU engine specifications Power, hp. 150 Fuel type Gasoline Volume, cm*3 1991 Maximum torque, N*m (kg*m) at rpm. 190 (19) / 3500 Fuel consumption, l/100 Read more…

N52B25OL is a gasoline power unit with a maximum output of 218 horsepower and a displacement of 2.5 liters. This engine can be found under the hood of the BMW 5 Series. Engine specifications N52B25OL Power, hp. 218 Fuel type Gasoline Volume, cm*3 2497 Maximum torque, N*m (kg*m) at rpm. 250 (26) / 2750 Fuel consumption, l/100 km 8.7 – 10 Engine type In-line, 6-cylinder CO2 emission, g/km 176 – 178 Cylinder diameter, mm 82 Read more…

N53 series engines were installed on cars from Bavaria Motors in 2005-2010. These power units have serious advantages over their predecessors. N53 has a serious competition in the engine market and have the advantages that are inherent in German engines: namely, reliability, life and maintainability. The first engine, which came out under the index N 53 was n53 BE30. It was released in 2004. On its basis, the motorists of Bavaria Motors produced N52 B30 Read more…

The M47D20 diesel engine has proven itself to be as positive as possible during the period of its constant use. This power unit was used exclusively for BMW cars belonging to the third and fifth series of production. It has an in-line form and a 4-cylinder head. There are 4 valves on each cylinder. It is recommended to use diesel fuel for comfortable operation. At the same time, the consumption can be called actually quite Read more…

This engine was produced from 2001 to 2006 and managed to please many car enthusiasts. Its cylinder block is made of aluminum. As a power system, the proven injector is also used. The inline type allows the apparatus to perform its work more qualitatively. There are 6 cylinders, and each of them has 4 valves. The stroke of the piston pleased the drivers, because it was only 72 millimeters. But the diameter of the cylinder Read more…

M47TUD20 is a diesel power unit from the German concern, which was intended to be installed under the hood of the first-generation BMW X3 in the E83 body. With a working volume of 2 liters, this power unit is able to develop a maximum power of 150 horsepower. Engine specifications M47TUD20 Power, hp. 150 Fuel type Diesel fuel Volume, cm*3 1995 Maximum torque, N*m (kg*m) at rpm. 330 (34) / 2000 Fuel consumption, l/100 km Read more…

With a displacement of 3.8 liters, the s38b38 engine was developed to provide the B36 with high performance. It is distinguished not only by its good power, but also by its large cylinder diameter, which is 1.2 mm larger than other engines. To increase displacement and power, the piston stroke was changed by 4 mm. Supplied to the Austrian and Swiss market bmw s38b38, was distinguished by the presence of a ceramic catalyst. The manifold Read more…

The N57S is an outstanding engine for the BMW 3-series and beyond family cars. It runs exclusively on diesel fuel. It has outstanding technical characteristics and is a rare combination of extremely high power and at the same time economical fuel consumption. It is almost impossible to find the exact figure, because it all depends on where the driver predominantly uses his car. If you use a mixed style of driving, then for 100 kilometers Read more…

The turbocharged diesel engine with an in-line arrangement of six cylinders was launched in 2008. It was produced to replace the M57 range of engines. The new motor used a closed cylinder block made of aluminum, which was equipped with cast iron liners. The working volume of the motor is 3 liters. The cylinder head was also made of aluminum, and had a lower height than the previous model. The cylinder head was equipped with Read more…

This engine was produced from 2005 to 2011. It has aluminum and magnesium as the basic material for the cylindrical block. It also has an injector as a power system. The engine type is again inline, but there are 6 cylinders. Each cylinder has 4 valves as standard. The piston stroke is 78.8 millimeters. And the cylinder diameter is 82 millimeters. The compression ratio is 11. The unit has a volume of 2.5 liters, which Read more…